How To Install Wyze Doorbell Without Existing Doorbell?

Recent trends have me spending more time alone in my room.

Because I work from home, I’m generally focused on work when someone knocks on the door, which is a problem.

I reasoned that purchasing a Video Doorbell would provide me with some peace of mind. I might be alerted to visitors in more than one way in this approach.

I didn’t even have to leave my room to chat with them. The Wyze Doorbell was my choice because of its low cost and high level of dependability.

The only reason I didn’t use it was because I didn’t have a doorbell circuit in my home.

She was correct. After all, I set it up in less than 30 minutes after doing some reading on the Internet.

The Wyze doorbell requires a plug-in transformer and a chime to function without an existing doorbell. You just need to plug the transformer into a power outlet and attach the cables to the Wyze doorbell.

Wyze Doorbell Voltage Requirements

The power and voltage requirements for your Wyze doorbell should be known from the outset.

To avoid blowing a fuse or causing the home to collapse, it is essential to take care while selecting a transformer. If you want your Wyze doorbell to work properly, you’ll need a 5V power source that can provide 2A of direct current (DC).

Wyze doorbell installation is made easier if the input voltage of the plug-in transformer falls between 16 and 24 volts (16V is the minimum AC requirement).

I purchased Ohmkat’s plug-in transformer after ensuring that it was compatible with the Wyze doorbell and that the voltage was right. It has been shown to be a reliable solution after six months of constant use.

How to Install Wyze Doorbell Without Existing Doorbell Using A Plug-in Transformer?

Before you can begin installing your Wyze doorbell, you’ll need to gather the necessary supplies and tools.

Here is a list of the items you’ll need for the project —

• Phillips screwdriver-compatible plug-in transformer.
• Liquid electrical tape (ideally) or conventional electric tape may secure wires together.

In addition, you’ll discover the following things in the doorbell box:

• The use of cable ties
• The backside
• Wedge with a 30° angle
• The anchors for the walls.
• Wall anchors
• Extending the reach
• Wire for the fuse
• Caps made of wire

Measure the Distance From Doorbell To Power Outlet

For the Wyze doorbell to work, you’ll need the power rates that we’ve previously discussed.

Make sure the power supply line is long enough to reach the doorbell position from your outlet if you’re using one. Because the outlet was a bit further away from where the doorbell was installed, I ended up needing a longer cable in my situation. I found an extension cord that works with the plug-in transformer I previously linked to.

Connecting the Plugin-Transformer

Wyze Labs repurposed an old mechanical doorbell circuit board for its smart doorbells. From the existing wiring, it obtains electricity.

Due to the lack of an existing doorbell, a plug-in converter and a power supply will be required.

A wall socket near our main entrance, where the doorbell is located, is required to utilize the plug-in adaptor. Begin by unplugging the adapter and arranging the remainder of the cabling.

Run the Power Cable from the Front Wall to the Install Location

We’ve now located the front-wall outlet for future usage. Draw the wire from the wall to where it will be installed.

Alternatively, you may cut a hole in the wall and run the cable to your front door. This will necessitate the wire being snagged through your windows or door. Here are the procedures to take if you need to drill a hole in the wall to connect –

Make sure the outlet’s cover is removed.

Drill a hole in the area around the outlet.

Once you’ve drilled a hole, use adhesive tape to secure the wire to the drill.

Pull the wire from the opposite side of the hole once it’s been pushed through.

Make sure to leave a gap between the outlet and the wall in order to prevent drilling through and making a hole in the wall. Alternatively, you may use a siding tool.

Make sure you have enough cable to set the doorbell at the proper height once you’ve guided the wire to your doorway. Using the cable clips included in the package, you may secure the wire to the wall for improved cable management.

Connect the Wires to Your Doorbell

The power connectors on the rear of the doorbell accept two extension cables, which are included in the box. The doorbell may be connected to either end of the wires, regardless of their polarity.

Attach the forked ends of the extension wires by loosening the screws on the rear. Tighten the screws when they’ve been correctly placed. To ensure that your connections are secure, you may use electrical tape.

Using A Plug-In Chime With the Wyze Doorbell

Because the Wyze doorbell has no internal batteries, we can’t utilize the current chime. A plug-in chime is what we need instead.

When we press the switch on a mechanical doorbell, the circuit loses power, and the doorbell connection is briefly lost. On the other hand, Wyze doorbells do not follow the same rule.

The previous doorbell circuit was bypassed during the installation of the Wyze doorbell. Thus, if power is lost and restored by pressing the button, it will not signal.

Because it’s compatible with the plug-in transformer I put up, I used Ohmkat’s plug-in chime as a solution. That’s also what I’d advise you to do. There are several tones and the possibility to link additional chimes included in the package (for example, on different floors).

Drilling Instructions For Installing Wyze Doorbell With a Plug-in Transformer

We don’t want a doorbell that’s too far away, or that’s lower than eye level. As a result, the length of the cable must be taken into account.

Before installing the doorbell, we must first install the wall mount. There are instructions on how to discover it in the packaging.

This is what you need to do —

• Make a note of where the screws for the doorbell are located on your wall.
• With the given drill bit, pierce the wall with the holes (works for masonry or stucco installations)
• Ensure the wall anchors are securely in place.

The wall mount may be used to install the doorbell flat on the wall, or the angled wedge can be used for an angular view of the doorbell.

Drill and Screw Your Doorbell into the wall

Finally, the doorbell is connected to the twin wires on the wall. To ensure a safe and secure connection, I suggest utilizing the wire covers included in the kit or purchasing a set separately.

However, what is the best way to make use of wire caps? You’ll need to cover the wires with a wire cap first. A simple five or six turns with your hands, and the cap bites into place, locking the cables in place with little effort on your part. An alternative to employing electric tape is available.

Attach the Wyze doorbell to the desired spot with the included screws. To secure the screws, we used the wall anchors we’d already installed.

To activate your doorbell, just plug the converter into a power outlet.

Use the Setup Guide in the Wyze App to Connect the Doorbell with Your Wi-Fi

The doorbell should exhibit a flashing yellow status light if all your connections are working properly. Using the Wyze app, you may now finish the setup process.

• To access the + symbol in the upper left corner of the app, go to the Home screen and hit the plus sign.
• Add Device >> Cameras >> Wyze Video Doorbell >> Click on the Wyze Video Doorbell. Next
• Click “Ready to Connect” to begin the connection process. Allowing location access may be necessary.
• Doorbells ring when the QR code is held up to them. If the first scan doesn’t work, move about until it does.
• “I heard the QR code being scanned” is the doorbell’s response after a successful scan.
• When you tap the Next button on the app, it states, “Setup has been successfully finished.”

A solid blue status light on the doorbell indicates a successful Wi-Fi connection when it becomes solid blue.

You now have the option of adding a Wyze chime right away or at a later time.

Install Wyze Doorbell With a Transformer and Adapter

Using an external power source, the Wyze doorbell allows you to set a doorbell anywhere you choose since it doesn’t depend on the current doorbell circuit. As a result, the doorbell may be used for more than just ringing the bell.

I installed the Nest Hello and Ring Doorbell without an existing doorbell using the same manner, so I’m hoping that the Wyze Doorbell will work the same way.

The Wyze doorbell may be used to keep an eye on your elderly neighbors. They may push it to let you know they need your help, and you can put it wherever in the home. Because of its mobility, it’s a great doorbell choice for an RV. Before connecting the doorbell to your power source, ensure the installation and wiring are complete. Electrocution may result from poor wiring or short circuits.

Frequently Asked Questions