If you own a Roomba, you know that one of the most frustrating things is when the clean button stops working. You press it and nothing happens. The good news is that there are some things you can do to fix this problem.
If your Roomba’s Clean button isn’t working, there are a few things you can try to fix the issue. First, make sure that the Roomba is powered on and that the battery is charged. If the Roomba is powered on and the battery is charged, but the Clean button still isn’t working, try resetting the Roomba.
To do this, press and hold the Spot and Dock buttons simultaneously for about 20 seconds. After you’ve reset the Roomba, try pressing the Clean button again to see if it works. If resetting doesn’t work, you may need to replace the batteries in your Roomba.
You can find replacement batteries online or at a local electronics store.
How Do I Manually Reset My Roomba?

If your Roomba isn’t functioning properly, you may need to reset it. There are two ways to reset your Roomba: soft and hard resets. A soft reset simply turns your Roomba off and then back on again.
This is the equivalent of restarting your computer. To do a soft reset, first, make sure that your Roomba is powered off. If it’s not, press the power button to turn it off.
Once it’s powered off, press the power button again to turn it back on. That’s all there is to a soft reset! A hard reset is a bit more involved.
It essentially factory resets your Roomba, which means that all of its settings will be reverted back to their defaults and any data or information stored on its internal memory will be erased. To do a hard reset, first remove the battery from your Roomba. Press and hold down the “reset” button (which is usually located underneath the battery compartment) for 20 seconds while the battery is out.
This will erase all of the data stored on your Roomba’s internal memory. Finally, replace the battery and press the power button to turn on your Roomba.
How Do I Reset My Roomba Clean Base?
If you need to reset your Roomba clean base, there are a few steps you’ll need to follow. First, make sure that your Roomba is powered off and that the clean base is empty. Next, press and hold the “Clean” button on the top of the Roomba for about 20 seconds.
After that, press and release the “Spot” button and then press and hold the “Clean” button again for another 20 seconds. Finally, power on your Roomba and it should be reset!
Why is Roomba Not Responding?
If you’re having trouble getting your Roomba to respond, there are a few things you can check. First, make sure that the batteries are properly charged. If they’re not, Roomba won’t be able to do much.
Next, check the brushes and wheels to make sure they’re not jammed or obstructed in any way. If they are, clear them away and try again. Finally, take a look at the sensors – specifically, the cliff sensors and the dirt detectors.
If either of these is malfunctioning, it could explain why Roomba isn’t responding correctly.
How Do I Run a Diagnostic on My Roomba?
If your Roomba isn’t working as it should, you can run a diagnostic to figure out what the problem is. To do this, you’ll need to connect your Roomba to your computer and open the iRobot Home app. Once you’re in the app, go to the Settings tab and select Diagnostics.
From there, you can choose which test you want to run. The tests will vary depending on which model of Roomba you have, but they typically include a self-test, a wheel drop test, and a brushroll test. After running the tests, the results will be displayed in the app so you can see what’s wrong with your Roomba and how to fix it.

Credit: moderncastle.com
Roomba Clean Button Blinking
If your Roomba’s clean button is blinking, there are a few possible explanations. The most likely cause is that the Roomba’s dustbin is full and needs to be emptied. Another possibility is that there is something blocking the Roomba’s sensors, preventing it from starting a cleaning cycle.
If you’ve checked the dustbin and there doesn’t seem to be anything blocking the sensors, you may need to reset the Roomba.
Roomba Won’T Start Cleaning
If your Roomba won’t start cleaning, there are a few things you can try to get it going again. First, make sure that the Roomba is charged. If the battery is low, the Roomba may not have enough power to start cleaning.
You can also try resetting the Roomba by pressing the “Clean” button for two seconds. If neither of these solutions work, you may need to contact iRobot customer service for further assistance.
Roomba Clean Base Not Working
If your Roomba Clean Base isn’t working, there are a few things you can try to fix the issue. First, make sure that the base is properly plugged into an outlet and that the power cord is securely attached to the base. If the base still isn’t powering on, you may need to replace the power cord.
Another potential issue could be with the dirt bin. Make sure that it’s properly seated in the base and that there’s nothing blocking the sensors. You may also need to clean or replace the filters.
If you’ve tried all of these things and your Clean Base still isn’t working, contact iRobot customer support for further assistance.
Roomba S9+ Troubleshooting
If your Roomba S9+ isn’t working as expected, there are a few things you can do to troubleshoot the issue. First, check that the bot is properly charged. If the battery is low, it will take longer for the Roomba to clean your home.
You should also ensure that there aren’t any obstacles in its path. If something is blocking the Roomba’s sensors, it won’t be able to clean effectively. Finally, check the brushes and wheels for dirt or debris.
If they’re clogged, the Roomba won’t be able to move around freely.
If you’ve tried all of these troubleshooting tips and your Roomba S9+ still isn’t working properly, contact iRobot customer support for assistance.
Roomba J7 Troubleshooting

Are you having trouble with your Roomba J7? If so, you’re not alone. Many people have reported issues with their J7, and the good news is that there are some simple troubleshooting steps you can take to try to fix the problem.
First, make sure that your Roomba is properly charged. If the battery is low, this can cause all sorts of problems, including making it difficult for the Roomba to move around and clean effectively. To check the battery level, simply press the “clean” button on the Roomba and then look at the lights on the display panel.
If all four lights are lit up, then the battery is fully charged; if only two or three lights are lit up, then it’s time to charge your Roomba again.
If your Roomba is properly charged but still isn’t working correctly, one possible issue could be that something is blocking its sensors. The sensors are located on the front of the Roomba (underneath where it says “iRobot”), and they help guide the Roomba as it moves around your home.
If something is blocking them (like a piece of furniture), this can interfere with how well your Roomba works. So take a look and see if anything might be in its way.
Another potential issue could be that dirt or debris has built up in certain areas of your Roomba’s brushes or wheels.
Over time, this can happen – especially if you have pets who shed a lot! To clean these areas out, first remove any hair or debris that you see wrapped around any of the brushes (you can use scissors to cut it away). Then use a cotton swab dipped in rubbing alcohol to clean off each of the black plastic gears – there should be three sets in total (one for each wheel).
Once you’ve done this, reassemble everything and see if that helps get yourRoombaa working again like normal.
If you’re still having trouble after trying these things, unfortunately it may be time to contact iRobot customer service for further assistance…
Roomba Clean Button Blinking Green
If you have a Roomba vacuum cleaner, you may have noticed that the clean button blinks green when the unit is charging. This is perfectly normal and indicates that the Roomba is charging correctly. The clean button will stop blinking green once the Roomba is fully charged.
How to Reset Roomba?
If your Roomba isn’t working properly, you may need to reset it. Here’s how to do it:
1. Press and hold the Clean button for about 20 seconds.
This will put the Roomba into standby mode.
2. Press and release the Spot button three times. This will reset Roomba’s software.
3. Press and release the Clean button to restart the Roomba. It should now be working properly!
Conclusion
If your Roomba’s clean button isn’t working, there are a few things you can try to fix the issue. First, make sure that the Roomba is properly charged. If the battery is low, the clean button may not work.
You can also try resetting the Roomba by pressing and holding the power button for 20 seconds. If neither of these solutions works, you may need to replace the clean button assembly.