It may be very inconvenient to lose your television remote control. It may be very inconvenient to have to go through the whole setup procedure all over again.
Fortunately, Xfinity remotes are different from most other remotes. Because of the online remote code search tool is very simple to connect them with your television.
When I initially connected my Xfinity remote with my TV, I was apprehensive about its difficulty.
Given that I didn’t have much free time, I wanted to get the setup procedure over with as soon as possible. Fix my Xfinity Remote as soon as possible.
As a result, I went on the internet to check if I could discover anything to simplify my work.
How do you pair your Xfinity remote to your TV?
Open the online code lookup tool, pick your Xfinity remote model and your TV brand, then finish the setup using the code you get to connect your Xfinity remote with your TV.
Learn how to configure the X1, XR11, and XR15 remotes for your TV and get answers to commonly asked questions regarding Xfinity remotes in this article.
Program X1 Remote For TV And Audio With Online Code Lookup Tool TV and audio devices may be controlled using the same X1 remote. Visit Xfinity’s website and use the Remote Code Lookup Tool to discover your remote code.
Select your TV’s (or audio system’s) unique code by selecting your remote’s model, and pressing proceed.
It is necessary to hold down the setup button on remotes until the status LED on top turns green.
When the remote is in setup mode, use the remote code search tool to get the four- or five-digit code.
The status LED will blink green twice if the setup is successful. Try a new code if the status LED is still blinking red.
Hold down the Xfinity and Mute buttons while the TV is on for the remotes without a setup button, such as the XR15, until the status LED turns green.
This is when you’ll need to use the 4- or 5-digit remote code you discovered previously.
A successful setup is indicated by the status LED flashing green twice, much as on the XR11.
You’ll need to attempt a new code if the setup fails with a red flash.
Pair The XR11 Remote To A TV
Utilizing these methods, you can connect your XR11 remote with your TV without using the remote code search tool:
- Switch on your television.
- Change the TV input to the Xfinity TV Box input.
- Hold down the Setup button until the green status LED at the remote’s top illuminates.
- Use the Xfinity button on your remote to access Xfinity services. The status LED will start blinking green as soon as the battery is charged.
- If a pairing code is shown on the screen, enter it as shown in step 5.
- Now your XR11 remote may be used to control your television.
Pair The XR15 Remote To A TV
Use the following steps to connect your XR15 remote with your TV without using the remote code search tool.
- Turn on the television.
- Change the TV input to the Xfinity TV Box input.
- To become green, hold down the Xfinity and info buttons simultaneously for about five seconds.
- Enter the three-digit pairing code that appears on the screen to complete the pairing process.
- The XR15 remote control and your TV have now been connected.
- Follow the on-screen directions to set up your TV’s power, volume, and input control after the remote has been properly connected.
Remove TV And Audio Receiver Control
To disable the TV and audio receiver’s volume controls:
- Hold down the Setup button until you see a green LED light up at the top when you first get your remote.
- Enter the digits 9-8-6 in the appropriate field.
- When the remote is correctly reset, the status LED on top will blink green twice.
Completely abandon this strategy if it fails. Reset your Xfinity Remote.
Pair Up your Xfinity Remote to your TV
Using the remote code search tool to set up your Xfinity remote is a fast and easy procedure.
It’s worth noting that different TV manufacturers provide different remote codes.
So, don’t be concerned if one of the codes doesn’t work. If it doesn’t work, try a new combination of letters and numbers.
It’s possible that something went wrong during setup, in which case you’ll have to do a factory reset on your remote before trying again.
Best Seller List of Xfinity Remotes:
- Brand new unopened in plastic bag Xfinity XR15 Remote with voice Control for Xi6, Xi5, XG2 and X1 equipment.
- Enable a voice control for your convieniece in use.
- The Xfinity Voice Remote (models XR15) has an automatic pairing, which will make your installation easy.
- Easy access to accessibility features like Closed Captioning, video description and voice guidance
- The batteries are included in the pack.
- Brand new unopened in plastic bag Xfinity XR15 Remote with voice Control for Xi6, Xi5, XG2 and X1 equipment. Batteries included.
- Voice control, Automatic pairing
- Easy access to accessibility features like Closed Captioning, video description and voice guidance
- Pack of 2
- batteries included
- To Be Used XFINITY FLEX Device Only
- Voice control
- Batteries included
- Latest Model XR11 v2 Designed for Xfinity X1 Platform.
- Easy access to accessibility features like Closed Captioning and voice guidance
- Includes Voice Control & Backlit keypad
- Aim Anywhere Control (RF Capability): With certain set-top boxes, as well as with HD DTA devices,
- TV input control
- Latest Model XR11 v2 Designed for Xfinity X1 Platform. Easy access to accessibility features like Closed Captioning and voice guidance Includes Voice Control & Backlit keypad
- Aim Anywhere Control (RF Capability): With certain set-top boxes, as well as with HD DTA devices, TV input control
- No programming required. - Silicone rubber button. - Batteries and Manual are not included. - 30 Days Money Back Guarantee. - 90 days Warranty
- Small and easy to handle: The XR2 Remote was designed to be comfortable to hold. The buttons used most often are within easy reach
- Battery level indicator: Now you can test the battery power of your remote with a few simple button presses.
- Environmentally Friendly: Less materials and less power were used to make the XR2 Remote.
- Aim Anywhere Control (RF Capability): With certain set-top boxes, as well as with DTA devices, the XR2 Remote has the ability to control your set-top box or DTA even if they are stored in a closet or another room, up to 50 feet away!
- To Be Used XFINITY FLEX Device Only
- Voice control
- Batteries included
- On-Demand Remote Control
- Allow three setups: TV, CATV, AUX
- Link your TV, DVD Player, VCR, Receiver, Audio System & Much More
Frequently Asked Questions:
The number pad on remotes like the XR11, XR5, and XR2 has a dedicated setup button.
The XR15 (X1 or Flex) remote control, on the other hand, does not include a setup button.
If you have one of these remotes, you’ll need to hold down the Xfinity and info buttons simultaneously until the LED on the remote’s top changes color to green before using it.
What are the codes for the Xfinity remote?
Remote control codes for Xfinity are four to five digits long and are specific to each television maker.
Using these codes, your remote will be able to recognize your TV and connect with it.
Popular TV manufacturers have codes like LG’s 10178, Panasonic’s 10051, Samsung’s 10812, Sony’s 10000, and Toshiba’s 10156.
Why is my TV not responding to the remote?
TVs that stop responding to the remote control may have a variety of causes.
Insufficient power is the most frequent reason, which is easily remedied by purchasing new batteries.
Static electricity, broken buttons, or a faulty remote control are all possibilities as well.
Static electricity may be resolved by withdrawing the batteries for at least a minute and then re-inserting them.
Last update on 2024-03-29
