How To Program Xfinity Remote To TV?

Several of my buddies and I have just made arrangements to spend the night at my house to watch some football with the family. I had purchased the Xfinity TV cable box and the X1 entertainment bundle, so we were prepared and eager to get the program up and running.

Due to an issue with the Xfinity Remote not being set to the TV right out of the box, we were unable to see the kickoff and a significant chunk of the early section of the game. My pals and I were completely out of our minds as we frantically explored the internet for a method to figure it out together.

It took some time, but we eventually succeeded in programming the Xfinity Remote to control the television, and the situation was overcome. I made the decision to put up this detailed post on all I’d learned. I hope you find it helpful.

Use the Xfinity online lookup tool to program the Xfinity remote to the television. To do so, go to the Xfinity website. The setup button on your Xfinity remote should be held down while you input the code. It will be necessary to press and hold the Xfinity and Mute buttons if this does not happen.

It’s as simple as saying “Program Remote” to program your Xfinity voice remote to your television if you have one.

What Does Programming Xfinity Remote Mean?

Even though the Xfinity Remote manages your Xfinity Cable box, you’ll have to juggle two distinct remotes: one for the cable box and another for the television set. For those who have connected their Xfinity Remote to their television, they may switch it on, adjust the volume, and otherwise use it as if it were a standard television remote.

It is also possible to program the Xfinity remote while present in another room, allowing you to control your television. It has been reported to me by a few of my friends that they are able to change the stations on their television from up to 50 feet away.

Depending on the type you have, you may also be able to link your Xfinity remote with AV receivers such as soundbars and DVD players.

Which Xfinity Remote Model Do You Have?

The model number should be printed on the back of the device or engraved into the battery compartment lid. Here is a list of the basic Xfinity controllers:

Button Type: Silver with Red OK- Select Button Silver with Gray Silver with Red OK- Select Button XR16 Voice Remote Button Type: Silver with Gray Silver with Red OK- Select Button XR15 Voice Remote Button Type: Silver with Gray XR11 Voice Remote Button Type: Silver with Gray, Silver with Gray Silver with Red OK- Select Button Click on the OK button. Remote Control for the Digital Adaptor.

If you have a different model remote, the programming procedures will be different. In certain cases, it may or may not allow voice commands, and it may or may not have a specific setup button. Every model that is currently available has been included in the method.

Programming Xfinity Voice Remote to Control TV or Audio Device

Xfinity’s voice remotes allow consumers to manage their televisions and travel across their home network by speaking instructions into their remote. Changes in a channel or accessing content information are made more comfortable and quicker with this manner of operation.

In comparison to prior voice remotes such as the XR15 and XR11, the XR16 represented a significant advancement. You may now couple your remote control with your television by speaking instructions into it.

Continue to hold down the microphone button while speaking into it the phrase “Program remote.” In the next part, we’ll go through each stage in further depth.

Programming Xfinity Remote Using Online Code Lookup Tool

The Xfinity Remote Code Lookup tool has a comprehensive list of all of the compatible models, as well as all of the essential support papers for programming your remote.

Then, if you go to the bottom of your remote’s settings menu, you’ll be able to obtain a unique code that will allow you to program your Xfinity remote to your television by following these simple steps:

  1. Choose your model from the lookup tool and then click on the ‘Continue’ button.
  2. On the next page, choose the kind of device with which you want to link the remote control – TV, audio, or other devices.
  3. Depending on your option, you will be required to submit the name of the manufacturing company.
  4. When you complete your order, you should see the code on your screen as well as explicit instructions on how to start with the programming process.

It is conceivable that you may come across more than one potential code. Consequently, if the initial code does not function well for you when trying the approaches, you will need to choose another and try again.

While the process for locating the code is the same for all Xfinity remote devices, the settings may differ depending on the model.

How to Program Xfinity Remote to Soundbar

Programming Non-Voice Xfinity Remotes

Xfinity remotes that do not have a speech function (such as the XR5 or XR2) must be programmed using three different methods: the setup button, the number pad, and the programming code (from the lookup tool).

The following are the procedures to be followed:

  • Use the TV’s own remote control to turn it on (not the Xfinity one)
  • Check to verify that the TV input is set to “TV.”
  • Keep the Setup or Set button depressed (depending on the remote model).
  • Wait until the LED indication on the top of the remote turns green before continuing. However, for earlier black devices that only use a red LED, you can raise your finger after the light goes red to switch off the device.
  • Now, using the Numpad on your remote control, enter the programming code.
  • If the television recognizes the code, the green (or red) light will flash twice.

Programming Xfinity Remotes (XR11 Voice) with Setup Button

The XR11 does not enable voice commands to begin programming, in spite of the fact that it is a voice-controlled remote. The Setup button, which is a nice old-fashioned feature, is used in its place.

You may use the same methods as you did with the non-voice Xfinity remotes detailed in the preceding section:

  • The Setup button must be held down for a few seconds until the LED turns from red to green.
  • Enter the initial code that was advised by the TV’s maker.
  • Then try another one and another one until you succeed.

Programming Xfinity Remotes without a Setup Button – XR16, XR15 Voice Remote

The absence of a Numpad on the XR16 remote distinguishes it from the XR15. Instead, the setup is begun by speech, and no code is required. Both remotes, on the other hand, lack a standard setup button.

If you have an Xfinity voice remote, such as the XR16 or XR15, getting it to operate with your TV box or audio device is rather simple and uncomplicated.

Steps to follow for XR16 remote

  • Then, using your remote, press and hold down the Microphone/Voice button while saying – Program remote.
  • You should see a screen on your TV asking you to confirm that you want to use the remote to manage the power and volume of your television. Select ‘Yes’ without any hesitation.
  • Completing the programming is as simple as following the on-screen directions.

In the event that the voice commands functionality does not operate properly, you may manually start the programming process. Simply press the A button on your remote to travel to the “Remote Setup” menu on your television.

Steps to follow for XR15 remote

  • Keep pressing and holding down the Xfinity and the Mute buttons on your remote control for five seconds at a time. The LED indication should change color from red to green.
  • The five-digit code you obtained from the online lookup tool should be entered here. As long as the green light flashes twice, you are in the clear to proceed.

Once the pairing has been completed successfully, you should be able to manage basic TV features such as volume and power using your Xfinity voice remote. If you don’t notice any results, try again with a new code or reset your Xfinity Remote to factory settings.

Program Xfinity Remote to Soundbar

Programming Xfinity Remotes to TV with My Account App

As an alternative, you may configure Xfinity remotes using the My Account App, which is available for both iOS and Android devices. You may do this by following the procedures outlined below:

  • First, locate your television box by pressing on the TV icon.
  • Navigate to set up a remote control.
  • Look through the list to locate your remote control.
  • Decide whether you want to use a TV or an audio device and follow the on-screen instructions.

Program Xfinity Remote to TV to Use One Remote for Everything

In order to understand more about troubleshooting procedures and how to conduct factory resets, the Xfinity search tool is a wonderful resource for finding support and the user manual for your particular device. In order to link your remote with audio devices and DVD players, you must follow the same steps.

As soon as I program my Xfinity Remote to my television, I will be able to make use of features such as the “Aim Anywhere” option. In addition, since my Xfinity Remote operates on Bluetooth rather than infrared, I am not required to position my remote at a precise location on the television screen.

Best Seller List of Xfinity Remotes:

SaleBestseller No. 1
XFinity Comcast XR15 Voice Control Remote for X1 Xi6 Xi5 XG2 (Backlight)
  • Brand new unopened in plastic bag Xfinity XR15 Remote with voice Control for Xi6, Xi5, XG2 and X1 equipment.
  • Enable a voice control for your convieniece in use.
  • The Xfinity Voice Remote (models XR15) has an automatic pairing, which will make your installation easy.
  • Easy access to accessibility features like Closed Captioning, video description and voice guidance
  • The batteries are included in the pack.
SaleBestseller No. 2
(2 Pack) Xfinity Comcast XR15 Voice Control Remote for X1 Xi6 Xi5 XG2 (Backlight)
  • Brand new unopened in plastic bag Xfinity XR15 Remote with voice Control for Xi6, Xi5, XG2 and X1 equipment. Batteries included.
  • Voice control, Automatic pairing
  • Easy access to accessibility features like Closed Captioning, video description and voice guidance
  • Pack of 2
  • batteries included
SaleBestseller No. 3
Xfinity Comcast XR16 Voice Remote Control for Flex Streaming Device Only
  • To Be Used XFINITY FLEX Device Only
  • Voice control
  • Batteries included
SaleBestseller No. 4
Comcast/Xfinity XR11 Premium Voice Activated Cable TV Backlit Remote Control - Compatible with HD...
  • Latest Model XR11 v2 Designed for Xfinity X1 Platform.
  • Easy access to accessibility features like Closed Captioning and voice guidance
  • Includes Voice Control & Backlit keypad
  • Aim Anywhere Control (RF Capability): With certain set-top boxes, as well as with HD DTA devices,
  • TV input control
SaleBestseller No. 5
Comcast/Xfinity XR11 Premium Voice Activated Cable TV Backlit Remote Control New
  • Latest Model XR11 v2 Designed for Xfinity X1 Platform. Easy access to accessibility features like Closed Captioning and voice guidance Includes Voice Control & Backlit keypad
  • Aim Anywhere Control (RF Capability): With certain set-top boxes, as well as with HD DTA devices, TV input control
  • No programming required. - Silicone rubber button. - Batteries and Manual are not included. - 30 Days Money Back Guarantee. - 90 days Warranty
SaleBestseller No. 6
XFinity Comcast XR15 Voice Control Remote for X1 Xi6 Xi5 XG2 Xid with Backlight
SaleBestseller No. 7
Xfinity New COMCAST HDTV DVR Cable Remote Control XR2
  • Small and easy to handle: The XR2 Remote was designed to be comfortable to hold. The buttons used most often are within easy reach
  • Battery level indicator: Now you can test the battery power of your remote with a few simple button presses.
  • Environmentally Friendly: Less materials and less power were used to make the XR2 Remote.
  • Aim Anywhere Control (RF Capability): With certain set-top boxes, as well as with DTA devices, the XR2 Remote has the ability to control your set-top box or DTA even if they are stored in a closet or another room, up to 50 feet away!
Bestseller No. 8
XFinity Comcast XR15 Voice Control Remote for X1 Xi6 Xi5 XG2 (Backlight)
SaleBestseller No. 9
(2 Pack) Xfinity Comcast XR16 Voice Remote Control for Flex Streaming Device Only
  • To Be Used XFINITY FLEX Device Only
  • Voice control
  • Batteries included
SaleBestseller No. 10
3 DEVICE UNIVERSAL COMCAST XFINITY REMOTE CONTROL RNG DCX
  • On-Demand Remote Control
  • Allow three setups: TV, CATV, AUX
  • Link your TV, DVD Player, VCR, Receiver, Audio System & Much More

Frequently Asked Questions

Question

How do I pair my Xfinity XR2 remote to my soundbar?

Use the online code search tool to locate an Xfinity XR2 remote control.
Take a closer look at the manufacturer’s codes
While keeping your finger on the Setup button, target the TV with it.
The code is here.
For a step-by-by-step walkthrough, see the non-voice remote programming guide.

Where is the Setup button on the new Xfinity Remote?

There is no setup button on the new Xfinity remote, which instead depends on voice instructions or alternative keys.

Can Xfinity remote control the Amazon fire stick?

Each one will need a different remote control.

How do I register a device with Xfinity?

Connect the device you want to register to the Xfinity Wi-Fi network. For the first time, you may be asked to enter your Xfinity account information.

Last update on 2024-03-29

Lance Ulanoff is a renowned tech journalist, commentator, and on-air expert with over 36 years of experience. He has held esteemed positions including Editor in Chief of Lifewire and Mashable, where he delved into the impact of technology on daily life. Lance's expertise has been featured on major news programs globally, and he has made appearances on Fox News, CNBC, and the BBC.