Verizon Fios Remote Codes: A Complete Guide

Before purchasing it, I thought that setting my Comcast Fios remote control would be a difficult task.

However, due to Verizon’s official website’s Support section, I could locate the code for my TV in a couple of minutes.

The more I looked into Verizon TV remotes online, the easier it became to put up this guide.

For a standard TV remote to operate, it must send a binary transmission to the Television set that even the TV can decode.

Signals are coded differently by TV manufacturers to prevent signal confusion.

If you have a Verizon Fios TV remote (P265 or P283 model), the connecting codes to Galaxy, Sony, and LG are 331, 352, and 210, respectively.

The codes for various TVs may be found in Verizon’s official website’s Support section.

Using the instructions in this post, you will be able to set your Telecom TV Speech, P265, and P823 Big Key on the keyboard remote controls step by step.

The Microsoft Fios remotes and Comcast TV One are also discussed, as are other frequently asked questions.

How To Program Your Verizon TV Voice Remote?

Follow these steps to link your Verizon Fios TV Voice Remote with your Fios TV One or Fios TV One Mini:

• To link your Verizon Fios TV Voice Remote with your Fios TV, point it towards the Fios TV you want to use.
• Hold down the ‘O’ and Play/Pause keys at the same time for two seconds. 2.
• Let go of the buttons as soon as the blue light on your Verizon Fios TV Voice Remote starts blinking.
• Verizon TV Voice Remote was successfully linked and is connected to your Fios TV for your usage now when the blue light on the remote stops blinking.

When you link your Comcast TV Voice Remote with your set-top box, your Vodafone TV Voice Remote will instantly identify and operate any External monitor TVs and audio systems.

Follow these steps to set up your Verizon Fios TV Voice Remote:

• Select Settings from the drop-down menu on the menu bar.
• Choose Fios TV Voice Remote from the Voice Control menu.
• Select Voice Remote Program from the drop-down menu. Automatic Setup and Manual Setup are the only setup choices you’ll have after completing this.
• Automatic Setup should be selected as the installation method. You should notice a ‘Success’ message in the upper right corner of your TV screen after the Setup is complete.
• Choose Manual Setup if the automated Setup does not function for you for any reason.
• Choose your TV or receiver’s brand and model from the drop-down menu and follow the on-screen instructions.
• Your Verizon Fios TV Voice Remote has now been successfully configured for your TV and is available for use after the ‘Success’ message displays in the upper right corner of your screen.

Afterward, you may need to program your Fios Remote to change the Volume of your TV.

How To Program Your Verizon P265 Remote?

Follow these instructions to configure your Verizon P265 game controller:

• Assume you have turned on your TV & Fios set-top box.
• Tap and hold the “OK” and Fios Broadcasting buttons together until they release their grasp on you. As soon as you let go of the buttons on the remote, a double blink will appear on the red LED.
• Press and hold the Play/Pause button for one second at a time. Once the remote has found the correct code, the TV will turn off if you continue to press the button. You may cease pressing Play/Pause after the TV has been turned off.
• To switch on your TV, use the Verizon P265 remote’s TV Power button. Once the TV has been properly turned on, select the OK button to preserve your settings. If it doesn’t work, try pressing the Station Down button once per second until the TV turns on again. Press OK to preserve your changes when the TV has turned on.

The Digital Entertainment Guide (IMG) may be used to program (or even substitute) your remote control. To do this, open the menu, pick Customer Support, then Top Endorse Tools, and then Fios Remote Program.

Once you’ve clicked OK, you’ll be able to configure your Vodafone P265 remote control by simply following the on-screen instructions.

The remote control code for your TV may be found alphabetically by the name of the manufacturer here.

How To Program Your Verizon P283 Big Button Remote?

When it comes to programming the Telecoms P283 Big Button Remote, the instructions are fairly identical to those for the Verizon P265 Remote:

• Assume you have turned on your Flatscreen and Fios set-top box.
• Hold down formal Approval and 0 keys at the same time. The traffic signal on your remote control will flash twice before staying on when users release the buttons.
• Find your TV’s three-digit code here. Please enter the code into the remote control once you get it. The traffic signal will once again flash twice before staying on.
• The TV will automatically go off if you press the Connection Down button once per second. You may cease pushing the Channels Down button after the TV has been turned off.
• Tap the TV Control button on the side control to turn the sound back on. Press OK when the TV comes on to save your settings.

Final Thoughts: 

If you’re still having trouble using your remote, give Verizon’s Customer Support a call.

Be specific about the model of remote control you have and the issue you’re having.

This will make it easier for them to figure out what’s wrong and help you get it fixed faster.

Typing in the incorrect TV code is another typical problem.

Make sure that the TV code you choose is compatible with both your Verizon Fios remote (3-digit codes for Telecom P265 and P283 and 4-digit characters for many other variants) and the TV brand you possess.

Your Priori information remote Volume may stop functioning for various reasons, but resetting the pairing procedure can remedy this problem quickly.

If you unintentionally key in the incorrect code, you will always see the success message, and you’ll never be able to operate the TV due to that error.

Replace one’s Fios remotely or reset your Fios remote to start the pairing procedure from fresh to fix this problem.

Frequently Asked Questions