Every time the kids get home from school on a hot day, they crank the air conditioning upon the Honeywell Thermostat. Whenever we have visitors around, it’s on all the time since my friends love having a nice breeze blowing through their hair. This continuous harsh handling has caused many crashes in my thermostat.
Even though my thermostat was always being abused, it did teach me how to troubleshoot a problem. When the thermostat screen went blank and wouldn’t function, that was an issue. I realized I had to figure out how to reset my Honeywell Thermostat to get it working again. To help you out, I’ve included a list of all the Honeywell Thermostat series reset procedures in one article.
Turn your Honeywell Thermostat off, remove the batteries, and reinstall them in reverse polarity, with the negative terminals facing the positive terminals. Reinsert them in the proper order once 5 seconds have passed.
To reset your Honeywell Thermostat, you must first identify the model number of the device. The model number of the thermostat would be found mainly on a label on the front, shown on the rear, or verified via the digital interface.
Before resetting the thermostat, it is necessary to review the settings and reconfigure them per the model number of the thermostat. If the model number of the thermostat is located on the back of the device, you will need to remove it from the base plate to reach it.
I chose not to use a C-wire while installing my Honeywell Thermostat, which made the procedure much simpler for me. Follow these procedures to determine the model number of your thermostat located on the back of it:
- If your thermostat is powered by the mains, turn off the electricity by turning off the circuit breaker. Remove the batteries from the thermostat if you believe it is still operating (perhaps due to battery backup).
- Carefully remove the thermostat from the base plate, taking care not to damage any of the clips or pins in the procedure. Some of the thermostat types demand that you pull up from the bottom of the device to access the controls.
- Make a note of the model number located on the back of your thermostat.
- Reattach the thermostat to the base plate using the screws provided.
- Subscribe to this website’s newsletter for updates.
- I make my living by automating homes.
The thermostat also adjusts itself to the temperature of the room on its own. You may change the settings by connecting it to your device through Wi-Fi, using the Apple Home-Kit, or by using Voice Commands on your smartphone.
With the T6 model, you can see through the cover plate, and the screen illuminates when you touch it. This model is comparable to the T5, although it is a little bit larger overall. Unlocking the Honeywell thermostat must be completed before the thermostat may be reset.
Factory Default Settings Reset
Follow these procedures to restore the Honeywell T5+/T5/T6 to its factory preset settings:
- Make sure the gadget is turned on (it should be on).
- Hold down the menu button for 5 seconds.
- Now, scroll to the left until you see ‘Reset.’ Click here to return to the homepage.
- On the Factory tab, choose ‘Select.’
- You’ll see a ‘Are you sure?’ notice pop up on the screen.
- When prompted, choose Yes.
- Resetting your smartphone was successful.
Reset Wi-Fi Settings
If your Honeywell T5+ / T5 / T6 thermostat’s Wi-Fi settings need to be reset, follow these steps:
- Take your mobile device with you.
- Close all Wi-Fi and mobile data connections on your smartphone by going to settings. Set your phone to flight mode.
- Now, open the Honeywell Home App on your smartphone and choose the appropriate device.
- The COG wheel on your thermostat lets you access the system settings.
- As soon as you do this, the app will walk you through resetting your wireless network.
- Hold down the button on the thermostat that shows the current temperature.
- The thermostat’s Wi-Fi will be made available to the outside world.
- To proceed, tap the next button on the app.
- Select the Lyric Network names, and the app will let you know how to set up the thermostat based on those names.
- To proceed, click on the Next button.
- Enter the 4-digit display and choose ‘done’ to repair your thermostat device.
- Click on ‘Next’ after selecting ‘Home Network” and then “Enter Password.”
- Wait for 3 to 5 minutes after the Wi-Fi reset is complete for the thermostat and mobile app to sync.
- Your mobile app should now provide information about the thermostat.
Reset Thermostat Schedule
It is possible to restore the factory default schedules for your T5+/T5/T6 models using this technique. These are the actions to take:
- Hold down the menu button to bring up the drop-down menu.
- Select the reset option when it appears.
- Select the option for a timetable.
- Your thermostat’s schedule has been reset.
Reset HomeKit Settings
Honeywell’s T5+/T5/T6 thermostats may be reset using the following procedure:
- Hold down the menu icon button until the options appear.
- When the word Reset appears, click on it.
- By tapping the icon, you may access the HomeKit reset menu.
- There has been a hard reset of the device.
An easy-to-use control system with many buttons and control wheels is provided by the Honeywell Smart & Lyric Round Thermostats. Your central air conditioner and heater are controlled, humidity is measured, and the thermostat may be adjusted anywhere. Honeywell Smart & Lyric Round Thermostats may be reset in several ways.
Reset to Factory Default Settings
The Honeywell Smart & Lyric Round reset procedures are as follows:
- Hold down the ‘Weather button’ for five to ten seconds.
- You’ll see a menu button appear on your screen.
- Scroll down to ‘Factory reset’ and choose it.
- To confirm your selection, choose “OK” and then “YES.”
- To return the device to its original state, you must first restore it to its factory settings.
Reset Wi-Fi Settings
Resetting your Honeywell Smart & Lyric Round Thermostat’s Wi-Fi settings is covered in this section.
- Follow these steps to complete the project:
- Hold on the ‘Cloud’ symbol until the scrolling option displays, then release the button.
- Select the Wi-Fi option from the list by scrolling down and clicking on it.
- Once again, go to the bottom of the page and click on the ‘Setup’ option.
- The device’s Wi-Fi has been reset.
Reset HomeKit Settings
The following are the procedures to do a HomeKit reset on your Honeywell Smart & Lyric Round thermostat model:
- Hold down the ‘Cloud’ symbol to get more options.
- Find the HomeKit reset option by scrolling to the bottom of the page.
- Reset HomeKit by selecting the Reset HomeKit option.
- The process of resetting everything to default has been finished.
How to Reset Honeywell 9000 Wi-Fi Thermostat?
Advanced features like Google Assistant compatibility and voice control are included in the Honeywell 9000 Wi-Fi thermostat models. As a bonus, these models will send you messages and alerts if any problems occur in your house. In addition, you may use them to control other thermostats and configure them based on the climatic zone they are in. The techniques mentioned below may help you reset this model.
Reset to Factory Default Settings
Together with those outlined in the user manual, these procedures will restore the Honeywell 9000 Wi-Fi thermostat’s factory settings.
- To access the menu, press the Menu button.
- Locate the options by scrolling down the page.
- Continue scrolling down until you reach ‘Restore Factory Settings.’
- Select ‘YES’ as your answer.
- You’ve completed the reset procedure.
Reset the Wi-Fi Settings
Follow these instructions to reset the Wi-Fi settings on your Honeywell 9000 Wi-Fi thermostat:
- Select ‘Menu’ from the drop-down menu.
- Select the ‘Wi-Fi Setup’ option from the drop-down menu.
- To reset your computer, follow the on-screen directions.
- The Wi-Fi reset procedure has been completed.
Reset Thermostat Schedule
Follow these procedures and the user manual instructions to reset the Honeywell 9000 Wi-Fi thermostat’s schedule.
- Press and hold the ‘Menu’ icon on the toolbar to bring up the menu.
- Press and hold ‘Preferences’ to choose it.
- Restore your default schedule by selecting it and holding down the key.
- The timer on the gadget has been reset.
How to Reset Honeywell 6000 Wi-Fi Thermostat?
With the Honeywell 6000 Wi-Fi thermostat, you can browse and adjust the temperature from anywhere. You must first create an account on the Honeywell website to access this function. Consider these options if you own this model and need to know how to reset the gadget.
Reset to Factory Default Settings
The user manual outlines the procedures of resetting your Honeywell 6000 Wi-Fi thermostat. You’ll be able to return the device to its default settings by following these steps:
- Start the gadget and press the ‘Fan’ buttons to adjust the fan speed.
- Hold the Fan buttons down for a few seconds.
- Hold down the ‘Up’ arrow button for 5-10 seconds before releasing it.
- Hold down the 4th button from the left for a few seconds (it will change to 90).
- Keep pushing until the numeral changes to ‘1’ and then release the button.
- Choose ‘Done to finish the process.
- The device’s settings are restored to their original factory defaults.
Reset the Wi-Fi Settings
To reset the Wi-Fi settings on your Honeywell 6000 Wi-Fi Thermostat, follow the instructions below:
- Hold down the “Fan” and “Up” arrows on your thermostat.
- Once you reach ’39’ on the screen’s left side, stop tapping any of the following buttons.
- By hitting ‘Down,’ you may convert ‘1’ to ‘0.
- To finish configuring the Wi-Fi, click the ‘Done button.
- Locate the accessible Wi-Fi networks on your mobile device by going to ‘Device Settings.’
- Choose ‘Connect’ and enter your thermostat’s Wi-Fi name and Number.
- Enter the IP address on the Honeywell Thermostat Wi-Fi page by going to the ‘Home screen.’
- Select ‘Connect’ to connect to your own Wi-Fi networks at home.
- A successful Wi-Fi reset will display the ‘Connection Success’ message.
Reset Thermostat Schedule
Follow these procedures to reset the Honeywell 6000 Wi-Fi thermostat’s schedule:
- Press and hold the ‘Up’ arrow and the ‘Fan’ buttons at the same time.
- The left-hand side of the screen will include a number; replace it with ’85.’
- Then there will be another number on the right that you should alter to ‘1’.
- The thermostat’s schedule has been returned to its default setting.
How to Reset Honeywell 8320 & 8580 Wi-Fi thermostats?
Smart devices like the Honeywell 8320 and 8580 Wi-Fi thermostats let you manage the heating and cooling of your home from anywhere at any time. These gadgets have 10-inch LCD displays and operate on four AAA batteries. These are the ways for resetting thermostats if you have one of those models.
Reset to Factory Default Settings
In this part, I’ll show you how to restore the factory default settings on the Honeywell 8320 and 8580 Wi-Fi thermostats. These are the steps you should do according to the user’s guide for your specific model:
- Check to see whether your thermostat is set to a comfortable temperature (it should be on).
- Choose ‘System’ from the drop-down menu.
- Then, for the next five seconds, press and hold the black buttons in the middle of the screen.
- Choose ‘Restore Original Settings’ from the drop-down menu.
- The process of restoring the system to its factory settings has been completed.
Reset the Wi-Fi Settings
Follow these instructions to reset the Wi-Fi settings on your Honeywell 8320 or 8580 thermostat:
- You may unplug your router by taking off its faceplate.
- Wait a few seconds after unplugging the router before trying again.
- Reconnect the faceplate and re-plug the device.
- A menu will appear, with one option: System (the bottom option).
- When a new screen displays, continue holding down the center buttons.
- You may unplug your router by taking off its faceplate.
- Wait a few seconds after unplugging the router before trying again.
- Reconnect the faceplate and re-plug the device.
- A menu will appear, with one option: System (the bottom option).
- When a new screen displays, continue holding down the center buttons.
Reset Thermostat Schedule
These Honeywell Wi-Fi thermostat models include reset schedules that you’ll learn how to do in this section. The steps are as follows:
- Go to ‘System’ and make your selection.
- Keep your finger on the center black box to make selections.
- On the left, change ’00’ to ‘0165’.
- The correct number should be changed to ‘1’.
- Decide if you want to continue or not.
- Now that the thermostat schedule has been adjusted, everything should be as it was before.
How to Reset Honeywell 8321 Wi-Fi Thermostat?
The Honeywell 8321 Wi-Fi thermostat is a technologically sophisticated gadget that provides consumers with quick connection while also providing them with comfort. You can control the thermostat’s settings from any location and at any time, making it an excellent choice for energy conservation.
The next sections describe the various ways for resetting this model.
Reset to Factory Default Settings
In order to reset the Honeywell 8321 thermostat, follow the procedures listed below:
- Choose ‘Dealer Information’ from the ‘Menu’ option.
- The date code should be entered at the very bottom.
- Then click on a button that says “Done.”
- Scroll down to the ‘Installer Options’ section and choose that option.
- Date and time codes must be entered.
- To return to the default settings, click on the Reset to Default button.
- Click on the ‘Yes’ button to confirm your choice.
Reset the Wi-Fi Settings
In order to reset the Wi-Fi settings on your Honeywell 8321 Wi-Fi thermostat, do the following steps:
- Choose ‘Menu’ from the drop-down menu.
- Once you see the Wi-Fi setup option, hold down the ‘Down’ arrow key.
- Select Wi-Fi configuration from the drop-down menu.
- Resetting the device’s Wi-Fi settings was successful.
Reset Thermostat Schedule
Follow these instructions to arrange a reset of your Honeywell 8321 Wi-Fi thermostat.
- Press the ‘Menu’ button and then the ‘Down’ arrow until the ‘Preferences’ menu appears.
- Click on ‘Preferences’ and then click the ‘Down’ arrow buttons until the ‘Default Schedule’ option is shown.
- Choose the ‘Default Schedule’ from the drop-down menu.
- The schedule of the device has been reset.
How to Reset Honeywell T6 Z-Wave Thermostat?
For operation, the Honeywell T6 Z-Wave thermostat requires three AA batteries (not included). It features a big touchscreen. The gadget is energy-efficient and offers the user exceptional comfort and convenience. To reset this device, there is just one technique that you may use, which is described below.
Reset Thermostat through Z-Wave Exclusion
You will be able to successfully reset your Honeywell T6 Z-Wave thermostat using the Z-Wave Exclusion technique. Take the following steps:
- To access the thermostat’s menu, press the menu button.
- Move your cursor to the right or left until you see the word ‘Resets.’
- Select ‘Select from the drop-down menu.
- Continue to scroll to the right or left until you see the word ‘Schedule.’
- Select ‘Select from the drop-down menu.
- Select ‘Yes’ from the drop-down menu.
- The device has been restarted.
Conclusion
It’s not uncommon for Honeywell Thermostats to activate EM Heat when the main heat source fails. Your Honeywell Thermostat must be reset if this does not occur. Your heating and cooling needs may be programmed into the Honeywell thermostats, which will then turn on and off according to a schedule you choose.
When you know how to restore your Honeywell thermostat after it has malfunctioned, you will be able to make use of all of its intelligent and technologically sophisticated features!
-our editorial board has reviewed this article and has been approved for publication according to our editorial policy.