How to Reset Philips Hue Bulbs and Bridge? (2023)

Once in a while, we need to reset our Philips Hue smart lights, which are among the most dependable and simple we’ve ever encountered. While the Philips Hue smart lights are among the most dependable and user-friendly we’ve seen, there may be times when you need to reset them.

Your Hue system can be acting up, you might want to donate it to a friend, or you might want to start again with your smart home setup. Resetting Philips Hue smart lights is simple and shouldn’t take you long, regardless of whether or not you use the normal Philips Hue bulb or bridge or the Philips Hue Bluetooth bulb.

For various reasons, you may be unable to use your smart home system, you may want to give it away or sell it, or you may wish to start over with a clean slate. In order to reset Philips Hue lights, all you need to do is follow a few simple steps. Here’s how to go about resetting a single bulb or a whole system.

Reset Philips Hue Bulb

We are resetting a single Philips Hue bulb, or standalone light requires using the Hue app for Android or iOS, most likely how the bulb was originally set up. To access the Light setting menu, go to the app’s home screen and pick the menu button.

When you have found the light bulb or light you wish to reset, choose the icon next to it and tap Delete. It’s ready to be brought back in or utilized in a new system after the program has forgotten about it.

Any Philips Hue dimmers in your house will also have their bulbs reset. While the light is on, press and hold the On/Off buttons on the Dimmer Switch for around 10 seconds. Bulb reset when the light flashes for a short period before becoming steady.

First, you’ll need the serial number from your bulb. In most cases, the bulb’s serial number may be located on the bulb itself, near the socket. There is a good chance you’ll discover it on the control box that connects to your lights.

Make sure your Hue light is on before moving on to the next step. Give it a few minutes to be noticed.

Enter Settings, Light configuration in the Hue app. A new lightbulb may be added to your system by selecting the ‘Add light’ option. To reset a bulb, you must now press the Add serial number button and input the bulb’s six-character serial number instead of searching. Then click Search. Afterward, your light will reset and rejoin your network.

Any Philips Hue dimmers in your house will also have their bulbs reset. While the light is on, press and hold the On/Off buttons on the Dimmer Switch for around 10 seconds. Bulb reset when the light flashes for a short period before becoming steady.

Philips Hue Bridge

Reset Philips Hue Bridge

The Hue Bridge may be reverted to its factory settings in order to reset all of your lights and bulbs at once. Afterward, you’ll have to set up the Hue Bridge and any lights you purchased anew from scratch.

When you switch your Hue Bridge over, you’ll see a button labeled “Restore factory settings.” In order to reset your complete system, you’ll need a paperclip or some other tiny, thin item to push into the hole next to the label for a few seconds.

This is not something you should do unless instructed to by a Philips Hue customer care representative, as stated in the company’s official support manuals. Your Hue bulbs’ serial numbers may need to be re-entered after a reset, depending on your arrangement.

Hue Bridge resets all lights and accessories that are connected to the network. Thus it’s important to keep this in mind while doing so. Preferences like light groups and scenes, routines, and widgets will be lost if you migrate to a new platform.

Resetting your Hue Bridge to factory settings will reset all of your lights and lamps at the same time, allowing you to restore your system to its original state. As a result, the Hue Bridge and other lighting fixtures will be re-installed from scratch.

Resetting your Hue Bridge is as simple as flipping it over and finding a Restore factory setting button. This will reset your whole system if you hold it down for a few seconds. You may need a paperclip or some other small, thin item to poke a hole next to the tag. Installing Hue without a Bridge is the recommended method.

Resetting a Philips Hue system is something you should only perform if instructed to do so by a customer support representative, as stated in the company’s official service documentation. The serial numbers of your Hue bulbs may need to be entered after a reset, depending on your installation.

Keep in mind that if you upgrade your Hue Bridge, you will lose access to all your connected accessories and lights. Light settings, patterns, widgets, and groups of lights will all be wiped out in the next version of the software.

Reset Your Philips Hue Network

Philips Hue lights and the Philips Hue Bridge should be rebooted whenever feasible. The Hue Bridge’s factory reset button should only be used after all other troubleshooting options have been exhausted, not before.

The Hue app makes it simple to rearrange your lights and assign them to different areas of your home. You may either add additional lights or rename the ones you already have by going to a certain room and selecting the menu option and attempting to avoid resetting Philips Hue lights and the Philips Hue Bridge whenever feasible is a good practice. Check out the other troubleshooting alternatives before eliminating lights from the system or pressing the factory reset button on the Hue Bridge.

In the Edit room or move lights menu option, you may rename or add bulbs and lamps to or remove them from the present room. If you’ve relocated your Hue Go to a new location, this is the best approach to re-establish your Hue configuration. Third-party programs and platforms are no different; however, you may need to consult official support materials for specifics.

Using the Google Home app on your phone, press a bulb, then the cog symbol unlink your Hue lights from the Google Home network if you’ve integrated Philips Hue. Rearranging your lights and assigning them to different rooms is a breeze using the Hue app.

It’s possible to add additional lights or rename the ones you already have by using the menu button (three dots, top-right). Setting your Hue Go upstairs is ideal for changing your Hue installation without causing any tension.

As with third-party programs, you’ll need to consult the official service documentation for specifics. The cog symbol on a Hue bulb may be used to unlink other Hue lights from a Google Home system if you have them connected. To assist you, here are some suggestions.

Final Thought

Following on from my explanation of how to reset Philips Hue lights earlier, I hope the following information will be useful to you.

-our editorial board has reviewed this article and has been approved for publication according to our editorial policy.

Lance Ulanoff is a renowned tech journalist, commentator, and on-air expert with over 36 years of experience. He has held esteemed positions including Editor in Chief of Lifewire and Mashable, where he delved into the impact of technology on daily life. Lance's expertise has been featured on major news programs globally, and he has made appearances on Fox News, CNBC, and the BBC.