Considering purchasing a Ring Doorbell for your home or office? Are you thinking about purchasing the Ring doorbell but are concerned about how long the battery will last in these devices?
Your search has led you to the correct website, my friends. As part of my hunt for a solution to this problem, I came across a number of recommendations that I utilized to extend the battery life of my device and other viable approaches that I discovered when investigating the issue.
‘Normal Use,’ according to Ring, will let the battery to last around 6-12 months.
However, they never indicated what actions would fall under the category of ‘Normal Use,’ which is an oversight.
The battery life ranged from 3-4 months to 3 weeks or less when individuals first started using them, as they discovered when they began to use them.
This discrepancy was to be anticipated since battery life is mostly determined by elements such as the number of events that occur in front of your door, the weather conditions, and so on and so forth.
The battery in your Ring doorbell should last between 6 and 12 months, depending on how often you use your doorbell.
Many circumstances, such as cold weather, frequent usage of the live view, or weak Wi-Fi signal, might contribute to rapid battery depletion. Some of these issues include:
Hacks to extend the battery life of the Ring Doorbell include charging the battery in a warm area, hardwiring the doorbell to prevent the need for a battery entirely, adjusting the motion detection setting, removing the live view, and utilizing Wi-Fi boosters, among others.
What Drains Your Ring Doorbell Battery?
Sudden Various variables, such as the following, might contribute to battery draining or reduced battery life.
The Climate
All of the Ring Doorbell devices utilize Lithium Polymer batteries, which are less successful in holding a charge at temperatures below 4°C than other types of rechargeable batteries (36F).
Consequently, you may find yourself recharging your battery on a regular basis. The battery’s life would be reduced as well if it were exposed to extreme temperatures.
Aside from that, there are a number of crucial temperatures at which the battery’s behavior changes; a few of them are listed here:
When the temperature is 4 degrees Celsius (36 degrees Fahrenheit), the lithium-polymer battery’s charge retention capability is severely reduced.
It is possible that your battery will not recharge at all when the temperature is below 0°C (32°F). This is true even if your battery is directly connected to the power outlet.
Li-Polymer batteries may become inoperable at temperatures below -20°C (- 5°F).
Usage
A motion detector activates whenever an event happens in front of the device, causing many additional actions such as video recording and sending alarm messages to be triggered.
Live Viewing, speaking via the doorbell intercom, and other similar activities are examples of activities that use a lot of energy.
In the event that you have to utilize all of these capabilities in a single day, the battery will suffer, and its power will be reduced.
A Poor Wi-Fi Connection
If you have access to a strong Wi-Fi connection, the Ring Doorbell will operate best.
However, in the presence of a poor Wi-Fi signal, the device would automatically attempt to broadcast at a greater power in order to extend the Wi-Fi range, resulting in increased battery use.
How to Improve Your Ring Doorbell’s Battery Life?
Since we have discovered the main causes of lowering battery life, preventing or minimizing the occurrence of such circumstances would be the most important component in extending your battery life significantly.
Following are some examples of how to go about things:
Doorbell installation with hardwiring
In the same way that conventional doorbells do not need a battery, hardwiring the device to a power outlet in the home or a low voltage transformer may completely eliminate the need for one.
Get an indoor adapter if you want to learn how to connect a ring doorbell without using wires.
Decrease in the number of times people use the Live Feed feature.
As previously noted, extended use of the Live Feed function may deplete the battery’s capacity significantly. Thus it is strongly recommended that you only use it when absolutely required.
Occasionally, your Ring Doorbell may not go live if your battery is running low.
Motion Detection System Fine-tuning and Testing
The Motion Detection System may be triggered by any unwanted actions that take place at a distance from the doorbell that is too great.
It may be necessary to lessen the sensitivity of the motion settings by deactivating particular motion zones, adjusting the motion frequency, and so on in order to obtain the most performance out of the device in such circumstances.
The Wi-Fi signal intensity should be increased.
The Wi-Fi signal strength for the doorbell should be as strong as possible.
The RSSI value (found under the ‘Device Health’ part of the Ring App) may be used to monitor the device’s Wi-Fi signal strength, and low signal strength (RSSI of -40 or less) can be avoided when the Wi-Fi router is placed nearer the doorbell.
Aside from that, you might invest in Wi-Fi signal boosters, which would increase the power of the Wi-Fi signal.
Ring also offers the Ring Chime Pro, which is a three-in-one option for extending your Wi-Fi network that also has some other capabilities, and which I would strongly suggest you consider purchasing as well.
Check out our comparison of the Ring Chime and the Chime Pro if you are considering making the switch.
Recharging the battery only when it becomes depleted of its charge capacity
Charging a battery when it is completely or almost fully charged has been proven to shorten its life in several studies. Consequently, charging them when they are short on battery life is suggested.
Extreme weather should be avoided.
Taking the smartphone inside the building and charging it with the USB cord will be necessary if the battery runs out in such a situation.
The fact that it is being brought inside means that charging the battery will also cause the gadget to heat up a little bit. Before reinstalling it, make sure it is well charged.
- Make an effort to utilize the charger that came with this device when it was first purchased. Use a high-quality charger that can provide the appropriate amount of output current and voltage in any other situation. Using an excessive amount of voltage may result in your Ring Doorbell’s transformer blowing up.
- At any moment throughout the day, disable the Nightlight function.
Get an Extra Battery Pack For Your Ring Doorbell
It turns out that purchasing an additional battery pack is a good idea since you will not be deprived of the doorbell functionality while charging one battery pack.
In addition to the Ring Spotlight Camera, Ring Video Doorbell, and Ring Solar Floodlight, the Ring firm has developed a Ring Rechargeable Battery Pack compatible with various other Ring products.
It is also compatible with the Ring Stick Up Cameras of the Second and Third Generations and the Ring Peephole Camera.
It is equipped with a quick-release tab that allows the user to replace the battery without having to move the gadget.
As is customary, the battery life is said to be between 6 and 12 months. However, as we all know, battery life varies depending on how the gadget is used; therefore, we shouldn’t have unrealistic expectations for the smartphone when it comes to battery life.
Specs:
- A lithium polymer battery with a voltage rating of 3.6V and a charge capacity of 6000mAh is used in electronic devices.
- A USB charging cable is included with the purchase. It is possible that connecting to a regular AC adapter or to a PC will be satisfactory.
- Charging time: 5-6 hours (when connected to an alternating current source), around 12 hours (when connected to a PC).
- 89.86 grams is the weight of this item.
- 2 76 69 0.98 inches in size 2.76 69 0.98 in size
Get a Dual Port Charging Station For Your Ring Doorbell
The Ring has also developed a novel charger for its doorbell batteries, which it calls the Dual Port Charging Station for Ring Doorbell Batteries.
Two battery packs may be charged at the same time thanks to the charger’s dual charging ports, which are now under consideration for a patent.
The indicator lights included in this product enable you to determine whether or not the battery is charging or completely charged (Blue light suggests that the battery is fully charged).
This system is compatible with all Ring Doorbell batteries and is backed by a 12-month manufacturer’s guarantee.
FCC and UC certifications have been granted to the product, ensuring that it is of the highest possible quality.
Specs:
- 1 Power Adapter, 1 Power Cable, and 1 Dual Charging Station are included with the purchase of this bundle.
- Each charging slot receives a 5V consistent output voltage from the 100-240V power adapter.
- The input current is 0.3A.
Conclusion
Despite the fact that Ring boasts that its battery would last between 6 and 12 hours, customer research has shown that the reality is much different.
It is mostly due to the amount of labor that each gadget is required to do in a home.
As a result, by gaining an awareness of the workload in a specific home, you may be able to make any modifications to the Ring app’s settings in order to reduce the wasteful use of electricity.
Furthermore, it is necessary to replace and recharge the batteries on a regular basis when they get depleted.
Frequently Asked Questions
How to replace the battery on my Ring Doorbell?
Use a Star-shaped screwdriver to remove the screws that hold the device’s bottom bracket in place.
Replace the old battery with a new, fully charged one by sliding it up and out of the mounting bracket and into the device. To keep it attached to the gadget, tighten the screws.
How long does it take to charge the ring battery?
If the Ring doorbell battery is connected directly to an AC power outlet, it will typically take 5-6 hours to completely charge.
However, because to its low charging voltage, it takes longer to charge when connected to a PC (usually 12 hours).
How do you know when the ring battery is fully charged?
Lights on the charger indicate that the battery is being charged. A blue light indicates a fully charged battery pack.
Why is my ring doorbell not working after charging?
After each ring of the doorbell, the Ring app updates its battery %. There is no need to panic when your phone’s battery indicator flashes when you replace it.
To see whether the app’s battery is up to date, ring the doorbell and see if the battery level changes.
Why is my solar panel not charging my ring camera?
The accumulation of dirt and debris on the solar panel may prevent it from receiving enough light, which might be the root of the problem.
The adapter must be properly connected to the device and the panel must be cleaned.
If the problem persists, you may reset the camera and go through the setup process again.
As an alternative, you may get help from the Ring Support Team.
