How To Install A Ring Doorbell Mounted on Door? (2023)

The Ring Doorbell ($200) appears like any other doorbell, but it has an inbuilt video camera so that you can see who’s at the door–even when you’re not home–from your smartphone. Here’s a step-by-step guide on installing and configuring the Ring Doorbell.

The Ring Doorbell doesn’t need to be linked into your current system like a typical doorbell (though it can be). Your home may be filled with these wirelessly linked chimes that run on batteries, and you can purchase more chimes (available separately) so that you can place them in strategic locations around the property.

In order to guarantee that you hear the doorbell when it rings, even if it is not wired into your current system, you need to buy the doorbell and the $30 Chime separately. Installing it is also a breeze, requiring just that a bracket be screwed into the external wall of your home. Let’s get started now.

The Ring is a video streaming service. People are buzzing about doorbells these days. An important part of home security is that they are simple to set up and operate, making them a popular choice. As the name indicates, many homeowners consider placing this device around their front doors in place of a conventional doorbell.

How To Install A Ring Video Doorbell On Door?

However, can the Ring Video Doorbell be installed on the front door? There is a Ring Video Doorbell that may be attached to the door. The Ring Peephole Camera is the finest choice for door installation among the Ring doorbells.

The ideal setup would give you a full view of your yard or street from the front door. A smart doorbell isn’t the only thing to consider. Based on my research and experiments, I found that the Ring Peephole Camera is the best Ring doorbell to put on the door.

Which Ring Doorbell Is Ideal for Installation on the Door?

The Ring Peephole Camera is the best Ring doorbell to put on your door since it connects to your door’s Peephole. Knocks and other forms of door action are all detectable by this device. Ring Peephole Cam is a video doorbell that projects a picture to the user via the existing Peephole in the door.

Outside the United States, it’s known as the Door View Cam. With an apartment, this would be the ideal doormat. In order to do so, this is how: The Peephole Cam can detect any activity at the front door, including knocks.

Live View, night vision, two-way conversation, and motion detection are all included. This means that when someone knocks on your door, the Ring phone app will give you an alert, and you’ll be able to talk to the person remotely. Isn’t it a good deal, considering its price?

Aside from that, the Peephole Cam has the same functionality as the rest of Ring’s smart devices, which can be obtained via the Basic or Plus Protect Plans.

These features are included, but they don’t stop there. The Peephole Cam may be installed and used in a matter of minutes. It is powered by a user-replaceable and rechargeable battery, and setup takes just a few minutes.

The least amount of damage is done to the walls and other property, making it perfect for all apartment inhabitants. Reinstalling a regular peephole after moving out of your existing home is as simple as dismantling Peephole. As a result, this seems to be the best course of action.

For those who choose to stick with the simple Ring doorbell, Ring offers a wide variety of choices to pick from based on your specific needs. Product choices vary from the 2020 Ring Doorbell to the Ring Video Doorbell 3 based on the size and area required by the doorbell.

Rechargeable batteries mean that you can put these doorbells on the door. You may use an indoor power adaptor to connect a ring doorbell without needing any cables. You may adhere them to the door with some really strong 3M molding tape if you want to use them with batteries.

How To Install A Ring Doorbell Mounted on Door

How to Install or Attach Ring Video Doorbell on the Door?

A screwdriver, screws, charging cord (if applicable), and installation instructions are included with all Ring doorbell kits, regardless of the accessories included in each.

In addition to this, if you need to screw your Ring Doorbell into brick or stucco, you may require a drill to do so. This is made simpler with the Ring Video Doorbell 2 and the Ring Video Doorbell Pro, which come with a masonry drill bit. A box cutter or flathead screwdriver might also come in handy while you’re removing your old doorbell.

Locate the battery and connect it to a power source with the provided charging wire after you’ve unpacked your Ring. Because it’s supposed to be popped out after the doorbell has already been placed, we’ve learned that the battery for the Ring 2 may be difficult to remove.

In order to tell whether your battery is charging, you should notice a red and green light. Be patient; charging might take anything from four to six hours. You’ll have the green light to begin installation when the red light turns off, indicating that the battery is completely charged.

Remove it by holding it against a flat vertical surface (such as a wall). In order for the battery to fall into your palm, the wall acts as a push, and gravity acts as a pull. To connect your Ring Video Doorbell to your home’s Wi-Fi network, download the Ring app and follow the onscreen instructions.

The app will guide you through the process, and the whole setup and connection process takes no more than 10 minutes. Turn off the electricity to your doorbell at the breaker box in your home (typically located in the garage, basement, or at the back of your house). Because you’ll be dealing with exposed wires, this is necessary.

If you don’t already have a doorbell, you may skip this step and avoid tinkering with wiring. It’s possible to hardwire Ring doorbell cameras if you choose. Remove your old doorbell’s faceplate using a screwdriver or boxcutter to expose the screws. Removing a pre-existing doorbell from a wall will expose the two power cables.

If the old doorbell’s wiring is still twisted around screws on the interior, take care not to damage the wires by tugging too hard. Detach the wires from the old doorbell by loosening the screws.

At this point, all that’s left on your wall should be the hole left by your previous doorbell and the two wires that ran from it. Open the Ring app and the doorbell’s live video broadcast before installing the mounting bracket.

Ensure you acquire the desired angle by holding your Ring Doorbell against the surface above the hole in the same location where you want to attach it. Use one of the angled mounting brackets to raise, lower, or rotate the camera to one of these positions if you’re not already.

You may use the provided level tool to make sure that the mounting bracket is level, and then you can use a pencil to indicate the position of the new screws. Remove the level after they’ve been marked.

Use a screwdriver to fasten the angled mount to the wall first, and then the mounting bracket may be screwed to it. Alternatively, attach the mounting bracket straight to the wall over the hole left by your previous doorbell so that the wires emerge out of the bracket’s hole.

You’ll need to use the accompanying masonry bit if you’re installing on brick or stucco so that you can drill holes for the little white plastic anchors. Push anchors into the holes you drilled, place the bracket on top of them, and then screw the anchor screws into the anchors.

You don’t need to use the anchors if your house is covered with wood or vinyl siding. To extend the life of your present doorbell chime or have it ring when someone touches the doorbell button, you may now connect your Ring to those two wires from your current chime.

Ring Doorbell

You may skip this step if you don’t already have a doorbell. The Ring Chime is the best option for a conventional doorbell. You may also use phone notifications to be notified when someone is at the door.

It is best to start by removing the two screws that are positioned exactly on top of your wall’s hole where the wire is visible. Wrap the wires around each screw one at a time, ensuring they aren’t touching at any point. Make sure each screw is securely fastened to the board. If necessary, use a screwdriver to carefully tighten the screws. Congratulations! The circuit is now complete.

This is a good moment to connect the diode that came with your digital doorbell chime if it creates an electronic two-toned sound instead of the classic “ding dong.” For further details on this stage, refer to your installation instructions. Here we are at the thrilling part.

Make sure your Ring Video Doorbell is positioned slightly above the bracket, and then push in and down until it snaps into position. In this particular phase, it’s OK to use some effort. Once again, it’s time for you to turn on your gadget. It’s time to put it through its paces and make sure everything is running well.

Double-check that all of your connections are safe if you have your Ring Video Doorbell connected to your inside chime and it’s not sounding. A good time to check your diode if your chime is digital is now.

Using the tiny end of the accompanying screwdriver, attach the two included security screws to the bottom of the faceplate if everything looks OK. You’re done with your Ring Doorbell setup now.

This means you can experiment with different camera settings, pick what regions you’d want to have covered by your Ring camera, customize the way motion detection and night vision work, and more, all from inside the Ring app.

If we summarize this in steps

The first step is to remove any existing doorbell buttons.

Step 2: Use the level tool included in the installation package to line up and mark the mounting brackets.

3. Drill holes where mounting brackets have been noted.

Installing the doorbell is now complete once you remove the level tool from its mounting bracket.

Tie the Ring Video Doorbell to the bracket in Step 5.

Security screws must be tightened in Step 6.

Be sure to set up your Ring app account and link it to your Wi-Fi and the Ring device before beginning the actual installation of the Ring Video doorbell.

The App Store (iOS) and the Play Store (Android) may be found on the Internet (Android).

You must first set up the Ring app before using the Ring doorbell, which is different from other devices.

The battery must also be charged for devices not connected to a power source. After that, all Ring devices may be installed in a matter of minutes.

How to Prevent your Ring Doorbell from Falling from the Door?

It’s not always easy to place the Ring Video Doorbell on the wall. The doorbell might fall off the door if it isn’t done correctly.

In order to avoid it:

First, remove the doorbell from its mounting bracket and loosen the security screw to install the doorbell.

The hooks on the bracket must be precisely aligned with the device. To ring the doorbell, move it toward the wall and lower it again.

Best Seller List of Ring Doorbells:

FAQs:

Question

Do you need an existing doorbell for Ring?

The Ring doorbell may be installed without using an existing doorbell. You can simply hang the ring doorbell on a wall with or without an existing doorbell.

Do people steal Ring doorbells?

Ring doorbell theft is quite rare. They are attached to the walls with screws that are very difficult to remove.
Ring does, however, have a complicated theft policy that ensures a free replacement of the gadget within 14 days of the filing of a police record in the rare event of theft.

How hard is it to install a Ring doorbell?

Absolutely not. The Ring doorbell is one of the simplest smart technologies to install and operate. Only 6 or 7 steps are required to complete the installation.

How long does the battery last on the ring doorbell?

It is expected that the battery would last between six and twelve months, depending on how often it is used.
The device’s battery life is less than intended because of features like Live view that use more power.

Does the Ring doorbell ring inside the house?

Yes. No matter where your phone is, the Ring doorbell will ring to let you know when someone is knocking on your door, and an alert will be sent to your Ring app.
Ring Chime is a Wi-Fi-enabled Ring doorbell’s chime option.

Does the Ring doorbell charge if hardwired?

A hardwired Ring Video Doorbell does not require wired power to operate. For such, it is reliant on the battery. There is no other usage for the Ring video doorbell’s hardwired charging.

Last update on 2025-04-25

Lance Ulanoff is a renowned tech journalist, commentator, and on-air expert with over 36 years of experience. He has held esteemed positions including Editor in Chief of Lifewire and Mashable, where he delved into the impact of technology on daily life. Lance's expertise has been featured on major news programs globally, and he has made appearances on Fox News, CNBC, and the BBC.