How to Fix Amazon Echo Network Error: 7:3:0:0:1? Step by Step


How to Fix Amazon Echo Network Error 73001

Listed below are the measures to take to resolve the Amazon Echo error code 730:0001 and the explanation for this error code.

Amazon Echo Network Error 7:3:0:0:1: Basic Troubleshooting

See Troubleshooting Basics for basic troubleshooting for a wifi connection and the Echo issue 7:3:0:0:1.

Step 1: Rebooting the Echo device and connecting it to wifi.

Step 2: To restart your Alexa device, poke a little hole in its base to make it start up again, assuming that this isn’t happening for you in any manner. If you have an Echo 2nd generation, however, you will need to press the Operation and Volume buttons at the same time to complete the Reset operation.

Step 3: In addition, for the wireless router and modem to reboot simultaneously, hit the reset button on the router and wait for the devices to reboot together.

Step 4: You also need to upgrade the firmware on your router by logging into the Admin Panel. If you don’t know how to do anything, don’t do it, you may contact your router provider or request assistance.

Step 5: Do not forget to download and install the most recent version of the Alexa App.

Step 6: You should be able to use your Echo wifi again.

However, if it does not function to remove you from the Echo wireless network bind, follow the rest of the instructions. You may read them and use them to resolve your error code 7:3:0:0:1 on Amazon Echo. They consist of both fundamental and advanced troubleshooting techniques and procedures.

Echo (4th Gen) | With premium sound, smart home hub, and Alexa | Glacier White
  • PREMIUM SOUND: Rich, detailed sound that automatically adapts to any room. Supports lossless HD audio available on select streaming services such as Amazon Music HD.
  • VOICE CONTROL YOUR MUSIC: Stream songs from Amazon Music, Apple Music, Spotify, SiriusXM, and more. HD requires a compatible music streaming service.
  • SMART HOME HUB: Built-in hub to voice control compatible lights, locks, and sensors. Easily set up compatible Zigbee devices or select Ring Smart Lighting solar lights and bulbs.
  • ALEXA IS READY TO HELP: Set timers, reminders, and alarms. Alexa answers questions like "Alexa, what time is it?"
  • START YOUR ROUTINES WITH MOTION - Turn on compatible lights, play your Flash Briefing, or turn on the coffee maker when you walk into the room.

Reasons Behind Alexa Network Error 7:3:0:0:1

When:

  • When using Alexa devices, a wireless router is not recommended.
  • You’re using network extenders to increase the length of your network.
  • The router’s Configuration or settings have been incorrectly configured or set. It is possible to have two networks on a single router with the same name (SSID).
  • The Network Security Type has been entered incorrectly.
  • But on that way is a problem with network congestion.
  • You are the owner of malfunctioning equipment.

There’s no doubt about it; Alexa error number 7:3:0:0:1 is referenced.

Steps to Fix Amazon Echo Network Error 7:3:0:0:1

Step 1: About resolving the wifi where there is an echo connection issue, if you’re using a mobile device to access the Alexa app, you’ll need to remove the “Smart Network Switch” feature in the device’s settings 7:3:0:0:1.

To complete the process, all you have to do is go to Configuration -> Connection -> wifi -> wifi -> Advanced -> Smart Network. To finish the procedure, go to the next tab.

Step 2: Uncheck the Smart Network switch box to turn off the network and attempt to re-connect your Echo device to your home network once it has been disconnected.

Amazon Echo Network Error 73001

Do You Want to Discover the Cause Behind This?

Once the “Smart NSwitch switch” option is enabled, your mobile device will continue to search for a strong wifi connection.

As a result, When the network signal on a mobile device gets bad, the device automatically switches to another network to avoid being disconnected.

It would be preferable to have a reliable and powerful network for communication with the Alexa device without interruptions or delays.

Change Router Configuration to Make Echo Device Compatible:

To complete the router configuration, you must first know the router’s IP address.

  1. To begin, use the ‘Windows+R’ key combination on your computer’s keyboard. Enter the command ‘cmd‘ in the Run area and hit the ‘Enter‘ key.
  2. Now, type ‘ipconfig‘ and hit the Enter key on the blank screen. Then, To access the router’s login screen, make a note of the IPv4 address and type it into a browser window to view the screen.
  3. Fill out the admin username and password on the router’s login screen at this point. If you don’t know where to look for this information, look on the back of the router for a label with the serial number and login address on it.
  4. Locate and choose the After you have logged in to the router, choose the “Wireless Connection” option from the left-hand menu bar of the router settings screen.
  5. If the dual-band option is not already enabled when you are taken to the Wireless options page, you will need to do it when you go there. What needs to be done to activate the 2.4 GHz and 5.0 GHz networks on the page you’re looking at?
  6. After that, double-check and alter the SSID names for both networks if they are the same, if necessary. Reconfirm that you’ve assigned a user name and password that you’ve found to be simple to remember.
  7. If you need your echo device to connect to the 5.0 GHz network, you should reserve the 5.0 GHz channel exclusively for this device.

Change the Network Security to Troubleshoot Amazon Echo Network Error 7:3:0:0:1

  1. Choosethe ‘Security Options’ menu from the drop-down menu and configure your network to WPA2. Choose the ‘AES’ option from the drop-down menu if coding.
  2. Additionally, IPv6 has the potential to disrupt the network connection. As a result, the IPv6 assignment is disabled by going to Network-> Interfaces in > IPv6 assignment is disabled.
  3. After that, go to Setup -> WAN Setup and deactivate the ‘Port Scan and DOS protection’ option. For further information, please see the picture below.

Final Thoughts:

Listed below are the most common causes and remedies for the Amazon Echo problem code 73.0.3.0:1. Consequently, please let us know if we have overlooked any of the echo wifi issues solution options.

Last update on 2022-08-11

Mohommod

Electronic devices are like an addiction to me. Years ago, I started my job at an audio/video installation co. Then I realized that I have a passion for home theaters. It is a perfect scope to share my different experiences about electronics and home theaters.

Recent Content