How To Program Dish Remote Without Code?

Because of the large number of channels available, Dish Network TV is a great choice to consider when shopping for cable providers.

But the universal remote control of Dish TV is also a fantastic buy.

The Dish Network Universal Remote manages your Cable provider receiver and your TV and soundbar in your home theater setup.

Before using your universal remote, configure it and couple it with the appropriate devices, just as you would with some other universal remote.

This universal remote differs from others in that it doesn’t need you to input a code before using it.

Using user manuals, forums, and other internet resources, I’ve included all the information you’ll need to program your Satellite remote without the need for a code in this post.

The Pairing Wizard in the Settings menu may configure newer versions of Satellite remotes without a code. The Power Scan technique, which blasts off equipment codes and when one of them works, is required for older machines. Press the SAT button on the Dish remote to connect it to a Joey or Chopper DVR.

Which Model Dish Remote Do You Have?

The first step in reprogramming your remote is figuring out which model it is.

As a result, previous models like the 20.0 and 21.0 series and later models such as the 40.0, 50.0, 52.0, and 54.0 all have different pairing methods.

Whether you’re not sure which remote you have, go to the MyDISH website to check at the numerous models to see if yours matches the one you see.

Familiarizing Yourself with Your Dish Remote

Once you’ve figured out whatever model you have, it’s time to get to know your remote.

The components of the Dish handheld model 54.0 will be examined from top to bottom and from right to left in this article.

The rest of the lineup will likely use comparable layouts and have many of the same buttons.

Power: You can turn up the thermostat, your Dish receiver, and other accessories like your TV and soundbar using a conventional power button, just as you would with any other.

Home: Shows stuff from your DVR or On Demand that is now playing.

Options: This gives you access to the current menu’s extra choices if any exist.

BackReturns you to the main menu. You may return to Live TV by the press and holding this button.

Skip backward: The ability to go back ten seconds is provided by this feature. If the user wants to go back any farther, hold down the button.

Recall Views the channels you’ve lately been watching.

Diamond Button: Views the channels you’ve lately been watching.

Voice Button: To utilize voice search, pressing and holding this button for a few seconds.

Info: Shows information about the show you’re viewing at the moment. Holding down this button for a few seconds brings up a list of helpful hints.

Skip Forward: This gives you a 30 second time jump. To fast-forward, hold down the button and press again.

Channel Up and Down: This enables you to switch between channels and traverse the menus.

Double Diamond Button: Like the diamond button, this one may be customized as well.

How to Program Dish Remote Without Code?

It takes just a few minutes to program a Dish remote control.

When using a later model, such as a 40.0 or 50.0, all you have to do is go to Settings, Remote Control, and choose the Power Wizard option.

According to the pairing wizard, the remote will automatically link with your TV, so all you have to do is follow the on-screen directions to complete the pairing process.

The remote will do a ‘Power Scan’ on earlier devices like the 20.0 or 21.0 series.

There is a high probability that it will keep delivering units until one of these works.

Programming Newer Models of Dish Remotes Without Code

To program remotes like the 40.0, 50.0, 52.0, and 54.0, follow these steps:

• Press the Power button twice on your Casserole remote control to return to the menu. Because it lacks a Home button, the remote control model 40.0 may be used by pressing the Menu button once.
• The remote control may be activated by going to “Settings” and selecting “Remote Control” from the menu.
• To link your Dish remote with another device, follow these steps: 3.
• When you’re finished, click on the “Pairing Wizard” option in the menu.
• If you’re using a different device brand, be sure you choose the proper one for your Dish remote.
• After this, the pairing procedure will attempt a few separate device identifiers on the device you’d want to link with. To see whether the pairing succeeded, press either the Volume Up or Power button until the instructions show on your screen.
• Select ‘Finish’ to complete the matching process. Select ‘Try Next Code’ and try it again till it works.

Programming Older Models of Dish Remotes Without Code

To program older remotes like the 20.0 or 21.0 series, follow these steps:

• 1st, place the item you want to link on the screen of your Dish remote control
• Depending on the device you wish to connect, press and hold the DVD, TV, or AUX button.
• All four ‘Mode buttons’ will light up after around 10 seconds. Release the button you’ve been holding, and you’ll see a blinking light appear.
• To turn your remote on, press the Start button four times in a row. When the flickering stops and the controller is ready to be programmed, you’ll know.
• To transmit the initial code, press the Up vertical button on your remote control.
• This button must be pressed repeatedly until your smartphone shuts off. It’s a good sign when the gadget shuts off after you enter the correct code.
• When you’re finished, hit the pound (#) key that will save the code. When the code has indeed been stored, the Shift button will blink multiple times.

How to Pair Dish Remote With a Joey or Hopper DVR

If you have a top box and DVR installed, the installation crew will also couple your remote with these.

However, your Dish remote may not be synced with either Joey or Horizon DVR in certain rare circumstances.

If that is the case, you may synchronize the handheld by yourself by following these steps:

• On the Joey or Hopper, squeeze the Framework Info buttons on the front.
• Once you’ve done that, hit the Remember sitting button on the remote.
• Once you’ve done that, you have two options: Cancel or Back. If your TV’s system info screen vanishes after you sync your Dish remote control with the DVR, it’s a good sign.

Final Thoughts

Whenever your Dish remote isn’t connecting to your devices, remove and replace the remote and see if that helps. If your remote’s batteries are low, it may have trouble sending the signals needed to connect with your device.

Try resetting both your remote and receiver to factory default settings before pairing them again if the previous method doesn’t work.

Frequently Asked Questions