The Verizon FiOS TV One service has been a great addition to my entertainment options for quite some time.
Using Netflix and YouTube, in addition to all of the channels on my package, the tidy, compact tiny box has covered all of my entertainment demands.
How To Program Verizon FiOS Remote To TV Volume?
I have found that even when my parents, who have been long-time customers of Xfinity X1, come to visit, they are able to use it intuitively, despite the fact that they are not particularly tech-savvy.
However, the Verizon FiOS Remote did not seem to be adjusting the level of my television when I first put it up.
Obviously, the volume on my television had been set to an extremely high level, and I had to correct this situation.
Unlike the time my FiOS Wi-Fi Unit’s battery wouldn’t quit blinking, this was not a straightforward issue to resolve, and digging through all of the available resources required a significant amount of time and work.
I chose to create my own post since the directions weren’t explicit enough for me, and I hoped it might be useful to others who may find themselves in a similar predicament.
How to Program Verizon FiOS Remote to TV Volume?
Enter your TV manufacturer’s three-digit code using the FiOS TV Voice Remote, which has the buttons “0” and “Play/Pause.”
In order to input your TV manufacturer’s three-digit code on the Verizon P265 and the P283, you must first hit the “0” and “OK” keys on the device.
To use the set-top box as a backup, press “0” and “2” on the remote control, then type in “9-5-5,” followed by the “STB” button on the remote control.
Programming the Fios TV Voice Remote to control the Fios TV One
My TV viewing experience has been much-improved thanks to the FiOS TV Voice Remote.
Because it uses Bluetooth rather than IR like most other remotes, I don’t have to awkwardly aim the TV while using functions like muting or turning off the TV when I leave the room.
Although it comes with a wide range of voice commands, the sensitive microphone built right into the remote has been a lifesaver for me since it can pick up instructions I’m giving it while eating. Convenience is a strong word for it.
This set-top box was specifically made for Fios TV One from Verizon.
Follow these simple steps to configure the remote to operate the FiOS TV One:
- While pointing the remote towards the TV, press and hold the “0” and “Play/Pause” buttons at the same time.
- When the remote begins to glow blue, release both presses.
- Your Fios TV Voice Remote is now linked and ready for use when the light stops glowing.
Your TV should now be automatically identified and operated by your remote control once you’ve completed this procedure.
Go to Menu > Settings > Voice control > Fios TV Voice Remote > Programming Voice Remote > Automatic Setup in order to do this.
The moment you’ve completed this process, a message will appear in the upper right corner of the television screen stating “Success!”
The Manual Setup option will be required if the Automatic Setup option does not function.
Once you’ve done so, choose your TV brand and follow the on-screen instructions. When you’re done, you’ll see “Success!” appear in the upper-right corner of your TV screen.
Programming the Verizon P265 to control your TV
You shouldn’t be concerned if you have an older remote and are having this issue since the procedure for programming the remote to control your TV volume is quite similar.
- Check out this list of Remote control codes for Verizon P265 to see whether your TV is included. The list can be found in the remote user manual, which can be accessed through the link given below.
- Turn on your television as well as your FiOS set-top box.
- The “OK” and “0” buttons must be pressed at the same time to complete the operation. The red LED light will flash twice and then remain lighted for the rest of the period.
- Fill in the blanks with the TV-specific code that you learned from the user manual. Following this action, the red light on the remote will flash twice before the remaining light.
- Continue to push the “Ch+” button until the television is turned off.
- Test your remote control to ensure that it is functioning properly. To accomplish this, turn on the television and experiment with the volume controls, including the Mute and A/V buttons.
- Continue holding the specified key if none of the keys above work. Once you’ve verified that it works, you should release it.
- Ensure that all of the keys function properly before pressing “OK.” Once the red light has flashed three times, it will turn off. The programming of your remote control has now been completed.
The following are the Verizon 265 remote control codes for some of the most popular television brands:
- For LG, this is 210; for Philips, this is 285;
- Samsung has a model number of 331.
- Toshiba has a 397-slot card slot.
- Sony has a total of 352 cameras.
The Verizon P265 Remote User Manual has a complete list of codes.
Programming the Verizon P283 to control your TV
The Verizon P283 remote, like the Verizon P265, may be programmed to operate your TV with ease. Here’s how to go about it:
- The FiOS Set-Top Box and your TV should be turned on now.
- In your TV’s User Manual, which you may access through the button below, you’ll find the code for your model.
- The code for your TV may be found in the user handbook. Hold down the “OK” key while pressing the “!” key at the same time. The red LED on the remote control will flash twice before staying illuminated permanently.
- Enter your TV’s code, which you discovered by performing the preceding steps. The red LED on the remote control will flash once and then remain on for the duration of the show.
- Hold down the “Ch+” button until the TV shuts off on its own, then repeat the process until it does.
- Ensure that the remote control is functioning properly. Try turning on the TV, adjusting the volume, and pushing the Mute and A/V buttons on the remote to see if that helps. Once it’s shown to be effective, be sure to get it out there.
- If none of the keys listed above work, then press and hold the key you want to use. As soon as it begins to produce results, you should release it. Ensure that all of the keys are functioning properly before pressing “OK” to continue. Eventually, the red light stops blinking. You’ve now successfully configured your remote control.
Below is a list of several popular TV brands and the Verizon 283 remote control codes that go with them:
In terms of brands, Sony has 352 units, Philips has 285, Samsung has 331, JVC has 193, and Haier has 146.
You may find the whole set of codes in the Verizon P283 Remote User Manual.
Control the TV volume through the Fios Set-Top Box
You may use your Verizon remote to adjust the TV’s volume using your Set-Top Box (STB). Just follow these steps:
- In order to do this, press the “OK” button and the “2” button all at once. Allow yourself to release control of the buttons. There will be a two-blink sequence on the remote’s red light.
- Then, press the nine-five-five-five keys (in this order). This causes the red light to blink twice before returning to its original state of illumination.
- Use the “STB-Power” button on your remote to turn your TV on. The gadget will shut off when the red light blinks three times.
The volume of your television will now be controlled by the Set-Top Box. For those of you whose television changes volume in a haphazard manner, leaving you with little control over the level of the audio, this will be a practical choice for you.
Every Verizon remote that we have seen so far in this post follows the same procedure.
Reset the Remote Control to the Original Settings
This is a good option if your FiOS Remote is not functioning properly or if you are experiencing additional issues such as the remote not changing channels. Resetting your FiOS Remote will return it to its factory settings.
Follow the steps outlined below to complete your project.
- This is a good option if your FiOS Remote is not functioning properly or if you are experiencing additional issues such as the remote not changing channels. Resetting your FiOS Remote will return it to its factory settings.
- Follow the steps outlined below to complete your project.
As a result, the settings on your remote control have been restored to their defaults. Regardless of the remote device you have, the instructions are the same for everyone.
Conclusion
As a result, you’ll be able to determine what’s wrong with your Verizon FiOS remote and systematically deal with the issue.
Despite the fact that the troubleshooting instructions are straightforward, there are situations when nothing can be done to rescue the remote.
In particular, I suggest Verizon Protect Home, which provides 24-hour customer assistance and is the successor of their Tech Support Pro service, which takes care of repairs and replacements.
However, if you decide to transfer providers, you may simply return your FiOS equipment to Verizon.
Continuing the theme of premium features, if you have a FiOS Voice Remote, I strongly advise you to take full use of the voice commands function for a more hands-free and easy TV viewing experience.
